Notice
Damage to the valve
Damage to these parts can result in a malfunction.
► Observe the safety information sheets issued by the detergent
manufacturers!
► Only use detergents which are non-abrasive and not aggressive towards
stainless steel.
Carry out the following steps:
1.
Disassemble the valve, see Section 10.5, Page 41.
2.
Carefully clean the individual parts.
®
Done
10.6.2 Replacing the V-Ring
Fig.16:
V-ring insertion tool
Prerequisite:
•
Insert V-Ring without grease. To facilitate fitting, use water with a drop of
washing-up liquid to remove the surface tension. In order that no rust is
transferred, the washing-up liquid solution must be made up in a ceramic,
plastic, or stainless steel container.
Tools required:
•
V-ring insertion tool
Caution!
Danger of injury!
The scriber can slip off when the V-ring is removed
► Grip the valve disk in a vice with protected jaws.
► Unscrew the curved side of the scriber.
Carry out the following steps:
1.
Put a scriber into the V-ring and take it out.
Maintenance
Maintenance
430BAL008326EN_3
46
07.02.2022
