GEA ONE 11TS, Инструкция по эксплуатации и техническому обслуживанию

Страница: 164 / 301

ONE 7TS – Maintenance
Instructions for assembly
Proceed as follows:
- insert the gasket
(7)
into its seat in the flange or head; we recommend using food-grade vaseline or an-
other suitable lubricant to facilitate assembly operations
- preparare the seat
(6)
for assembly, with the ball
(5)
and o-ring gasket
(8)
inside it
- insert the flange
(3)
on the valve body
(2)
and position the two half-rings
(4)
on it to keep the flange in
position
- insert the prepared seat
(6)
on the valve body, keep it in position with your finger and insert the whole
valve on the seat flange
- insert the flange
(3)
on the stud bolts and manually screw the nuts
(1)
, in order to correctly block the
valve inserting the seat
(6)
on the o-ring gasket
(7)
- when the valve is in a stable position, before tightening the nuts
(1)
, correctly position the discharge pipe.
For safety reasons the discharge pipe must always be open and directed towards the ground
- tighten the nuts
(1)
fully.
FIG. 7- 29
page 7.61
This manual is property of
GEA Niro Soavi S.p.A.
and no part of it may be reproduced.