GEA ONE 11TS, Инструкция по эксплуатации и техническому обслуживанию

Страница: 39 / 301

ONE 7TS – Description of the machine and technical data
2.5 Environmental conditions
The machine does not require special environmental conditions for operation.
The machine should be installed in a fairly large, illuminated, ventilated, industrial building with a strong,
level floor designed able to support the concentrated weight of the machine.
Temperature:
from + 5° to + 40°C.
Relative humidity: 30% - Max. 90% with no condensate
Max Altitude 1000 m above sea level
NOTE: Unless otherwise indicated in the technical data sheet.
2.6 Atmosphere with risk of explosion and/or fire
ATTENTION:
The machine is not designed for use in explosive atmospheres. It is therefore prohibited to use the
machine in explosive or partially explosive atmospheres.
2.7 Lighting
The premises must have sufficient natural lighting and be equipped with devices to provide adequate artifi-
cial lighting for the safety and health of workers.
Lighting in the room must comply with the laws in force in the country where the machine is installed and
must be uniform and ensure good visibility in every part of the machine to prevent hazardous glare and en-
able operators to clearly read the calibration and control panels and to locate the emergency push-button.
2.8 Vibrations
When the machine is used in accordance with the indications provided in this manual, vibrations will not
cause hazardous situations.
Should excessive vibrations develop, the operator must immediately stop the machine and report the event
to
GEA Niro Soavi S.p.A.
2.9 Noise
The equivalent continuous A-weighted sound pressure level in the position occupied by the operator (at a
distance of 1 m and height of 1.69 m), measured during the final testing of the machine, was above
70db.
page 2.27
This manual is property of GEA Niro Soavi S.p.A. and no part of it may be reproduced.