Appendix
Flow rate adjustment
2018-9015-005
09-2016
Step 2: Flow regulator (if applicable)
A spreader can be equipped with a spreading tool bar using a distributor to
provide an equal amount of manure to each spreading nozzle.
The flow regulator connected to the distributor is used to direct liquid manure
inside the spreader tank therefore limiting the amount of manure inside the
distributor.
Note!
Always restrain flow rate using the flow regulator before adding a
restrictor inside the manual directional valve.
1
2
● To maximize manure flow inside the distributor, position the tension spring
near the edge of the lever (1). The tension on the spring will increase and
close the flapper inside the return pipe;
● To limit manure flow to the distributor, position the tension spring on the
opposite end (2). The tension on the spring will decrease and open the
flapper inside the return pipe.