GE ZBD4800XBB, Руководство по установке

Страница: 19 / 24

Installation
Stainless Steel Interior Dishwashers
19
Step
Install
Drain
Line
14
Step
Follow all local codes and
ordinances.
Drain Line Preparation
• The dishwasher is supplied with a
78" long corrugated drain hose.
The molded end is designed to fit
5/8", 3/4" or 1" diameter connec-
tions to the air gap, waste tee or
disposer. Cut on premarked line as
required for your installation.
Note: Do not cut corrugated portion
of hose.
• If the location requires a longer
drain hose, add up to 42" length to
the supplied hose. Use 5/8" inside
diameter hose and thin wall copper
coupler to join the hose ends.
Note: Total drain hose length must
not exceed 10 feet for proper drain
operation.
Drain Line Installation
• Connect drain line to air gap, waste
tee or disposer using either
Method 1 or Method 2 as previ-
ously determined.
• Secure connection using appropri-
ate clamps (not supplied).
• Make sure drain hose is not
kinked.
Cutting Lines
1" 3/4"
5/8"
Do not cut corrugated
portion of hose
13
Connect
Water Line
The water supply line should be flushed to
clear any foreign material before connecting
to the dishwasher.
• Make sure there are no sharp bends or kinks
which could restrict the water flow.
• Connect the water supply line to the 90
°
elbow.
• Turn on the water supply and check for
leaks.
Method 1–High drain loop with waste tee or disposer
32"
Min.
18"
Min.
Fasten to underside
of countertop
Fasten to underside
of countertop
32"
Min.
18"
Min.
Waste tee installation Disposer Installation
Note: Be sure to remove drain plug from disposer before
attaching drain line. Dishwasher will not drain if plug is
left in place.
Waste tee installation Disposer Installation
Method 2–Air gap with waste tee or disposer
90
°
Elbow
Hot Water
Supply