GE ZBD4800XBB, Руководство по установке

Страница: 12 / 24

12
3/4" Custom Panels
Models ZBD4800X Dishwashers
Door and access panels should be constructed
in the same manner as surrounding cabinetry.
Cut edges will show and must be finished for
optimum appearance. Provide these dimen-
sions to the cabinet manufacturer to ensure
that the panels are constructed accurately.
This dishwasher has an adjustable spacer bar
below the control panel. The spacer bar allows
you to match the height of adjacent drawers.
When adjacent drawers are shorter height
than the control panel, align the bottom of
the control panel by pushing the spacer bar
upwards and tightening two screws. Maximum
spacer bar adjustment is 3/4".
3
A
Step
3/4" Door
and
Access Panels
For Model
ZBD4800X
ONLY
Skip This Step
If You Are
Installing Other
Models
Models ZBD4800X do not have a finished door or
access panel. 3/4" thick custom panels are required.
3/4" Thick
Door Panel
22-1/2" Min.
23-1/4" Max.
See Example
1-5/8"
23-3/8"
3/4" Thick Access Panel
3/8"
Gap
28"
Panel
Height
4-3/4" Min.
5-1/2" Max.
Remove
Access Panel
Assembly
Remove 2 Screws
• Remove the two screws below the access
panel assembly.
• Lift the assembly off and set aside.
Adjustment
Screws
4-3/4"
5-1/2"
Spacer Bar
Any adjustment to the spacer bar will affect
the height of the custom panel.
EXAMPLE: Minimum panel height is 22-1/2"
Add adjusted dimension 1/4"
TOTAL PANEL HEIGHT 22-3/4"
OR
Measure the adjusted height of the control
panel. Subtract that dimension from 28". The
panel height will be 22-1/2" Min. to 23-1/4"
Max.