GE ZBD4800XBB, Руководство по установке

Страница: 18 / 24

18
Installation
Stainless Steel Interior Dishwashers
Level The
Dishwasher
9
Step
• Carefully upright the dishwasher, so as not to
bend the leveling legs.
• Tilt the dishwasher slightly and slip leg slides
under the leveling legs.
• Check to be sure the dishwasher is level and
at the proper cutout height.
• Tighten the bolts on each leveling leg against
the bottom of the dishwasher.
Leg Slides
Level
Top
And
Sides
10
Install
Side Filler
Strips
Step
Side filler strips are packed with the product.
If the cabinet cutout is wider than the dish-
washer, install the filler strips on both sides of
the dishwasher to cover gaps.
• Open the door fully.
• Remove the two screws on the inside front
frame of the dishwasher.
• Remove the plastic covering the adhesive
strip on the back side of the filler strip.
• Carefully, align the screw holes on the filler
strip with screw holes on the dishwasher.
Press firmly into place.
• Secure filler strips with original screws.
11
Step
Connect
Drain Hose
Locate the drain hose packed with the
dishwasher.
• Fit the drain hose onto the drain hose
adapter on the back of the dishwasher.
• Press together firmly and secure with a screw
type clamp supplied.
12
Step
Slide
Dishwasher
Into Opening
• Insert the drain hose into the cabinet wall.
• Slide the dishwasher into the opening a few
inches at a time.
• As you proceed, pull the drain hose through
the cabinet wall under the sink.
• If a power cord has been installed, insert the
cord through a separate hole in the cabinet
wall and pull along with drain hose.
• Check to be sure there is no interference
with waterline or house wiring.
Leg Slides