GE XGS868, Руководство по программированию

Страница: 61 / 133

Logging Data 3-5
November 2004
Selecting the End Date
1.
Use the pull-down menu to select the desired end date for the log
and press
Next Item/Enter.
2.
If you selected:
•
OK
or
TODAY
, proceed to Selecting the Time Increment below.
•
EDIT
, proceed to the next step.
3.
Enter the desired year (0-99) and press
Next Item/Enter.
4.
Use the pull-down menu to select the desired month and press
Next Item/Enter.
5.
Enter the desired day (1 to the number of days in the selected
month) and press
Next Item/Enter.
6.
Proceed to Selecting the Time Increment below.
Selecting the Duration
1.
Use the pull-down menu to select the desired units of measure.
2.
Enter the desired number of hours/days and press
Next Item/
Enter.
3.
Proceed to the Selecting the Time Increment below.
Selecting the Time
Increment
1.
Use the pull-down menu to select the desired time increment and
Next Item/Enter.
The time increment is the frequency at which the Model XGS868
takes and records data measurements. If any reading takes longer
than the programmed time increment, the log is filled in with the
next consecutive reading. For example, assume that a velocity
value of 3 ft/sec is recorded at 12:00:00 in a log with a time
increment of five seconds. If the next reading is 8 ft/sec and it
takes the meter 12 seconds to read this value, then both of the
missed readings (12:00:05 and 12:00:10) will be filled in with the
8 ft/sec value.
2.
Press
Next Item/Enter
to acknowledge the message.
Note:
Although each log is restricted to six logged parameters, it is
still possible to log more than six parameters. Simply re-enter
the
Create Standard Log
submenu as many times as
necessary to set up additional logs. Select the other desired
parameters, and run these logs simultaneously with the first
log.