GE XDP-H2, Руководство пользователя

Страница: 34 / 96

Setup and Calibration 4-5
January 2008
Setting the Display
Backlight
After entering the User Program , as described on page 3-4, the main
menu appears. To set the display backlight, proceed as follows:
Note:
“Lock All” and “Versions” menu options also appear on the
above list.
Note:
The “Fault Alarm” and “Analog Output” options are also
available in the above list box.
The display backlight has three possible settings:
•
Off - the backlight is permanently turned off
•
On - the backlight is continuously on
•
Timed - the backlight comes on whenever a key is pressed and
remains on until a specified time interval has elapsed without any
keypad activity
Note:
If “Off” or “On” was chosen above, the following two prompts
do not appear and you are returned to the User Menu
Cal Opt Disp Use the [
W
] and [
X
] keys to
select
[Opt]
and press
[ENTER]
.
Cal Opt Disp Use the [
S
] and [
T
] keys to
select
[User]
and press
[ENTER]
.
User
Lock Menus
User Use the [
S
] and [
T
] keys to
select
[Backlight]
and press
[ENTER]
.
Contrast
Backlight
Comm
User Backlight Use the [
S
] and [
T
] keys to
select the desired option and
press
[ENTER]
.
Off
On
Timed