GE M
EDICAL
S
YSTEMS
- K
RETZTECHNIK
DRAFT
V
OLUSON
® 730P
RO
/ 730P
RO
V (BT´04)
D
IRECTION
KTI105947, R
EVISION
2
S
ERVICE
M
ANUAL
Chapter 1 - Introduction
1-5
1-2-3
Product Icons
The following table describes the purpose and location of safety labels and other important information
provided on the equipment.
Table 1-5
Product Icons
LABEL/SYMBOL
PURPOSE/MEANING
LOCATION
Identification and Rating Plate
Manufacturer's name and address
Model and serial numbers
Electrical ratings
Rear side of the unit
Monitor rear side
On each probe
Device Listing/Certification Labels
Laboratory logo or labels denoting
conformance with industry safety standards
such as UL or IEC.
Rear side of the unit
Rear side of the monitor
Council Directive 93/42/EEC concerning
medical devices: The CE mark affixed to the
equipment testifies compliance to the directive.
Rear side of the unit
on each probe
Type/Class Label
Used to indicate the degree of safety or protection.
IP Code (IPX 1)
IP Code (IPX 7)
Indicates the degree of protection provided by
the enclosure per IEC 529. IPX 1 and IPX 7
indicates drip proof.
Footswitch
Probes
Equipment Type BF (man in the box symbol)
IEC 878-02-03 indicates B Type equipment
having even more electrical isolation than
standard Type B equipment because it is
intended for intimate patient contact.
Probe connectors
Front side of the ECG-preamplifier (MAN)
Rear of Power Supply
“CAUTION
This unit weighs...
Special care must be used to avoid..."
This precaution is intended to prevent injury
that may result if one person attempt to move
the unit considerable distances or on an incline
due to the weight of the unit.
"CAUTION" The equilateral triangle is usually
used in combination with other symbols to
advise or warn the user.
Various
ATTENTION - Consult accompanying
documents " is intended to alert the user to
refer to the operator manual or other
instructions when complete information cannot
be provided on the label.
Rear side of Power Supply
0123
