GE Voluson 730 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 96

background image

Safety

2.4

Remarks for safe Use

•

Get acquainted with the transducers and the ultrasound system: read the user manual thoroughly!

•

Follow these safety instructions as well as the clinically adopted precautions and measures for
hygiene.

•

The manufacturer is not liable for damage caused by improper or inexpert use of the device!

•

Any ultrasound transducers - irrespective of system and design - are sensitive to shock and shall
be treated with care. Pay attention to cracks which may allow conductive fluids to leak in.

•

Authorized personnel shall only perform any type of repair. Never attempt to open a transducer or
transducer connector. This leads to a loss of guarantee!

•

Avoid kinking, bending or twisting of probe cables and take care to guard them against
mechanical stress (e.g., wheels or heels).

•

The probes must not be exposed to mechanical shock (e.g., by dropping).
Any damage caused in this manner invalidates warranty.

•

Have the scanner system and the transducers regularly checked (for faulty cables, housing, etc.)
by authorized personnel!

•

Damage to transducer or cable may lead to a safety hazard, therefore have them repaired
immediately!

•

Before plugging in or unplugging a transducer, activate the "FREEZE" mode!

•

A specialist acquainted with the handling and use of the system shall perform installation and first
switch-on and check-up of the system.

•

The user must have read and understood the user manual.
The system must only be operated by trained and qualified personnel.

•

For safety reasons, avoid handling fluids in the vicinity of the system. Fluids leaking into the disk
drive can damage the drive. Never remove the storage shelf above the probe connectors; it helps
to protect the unit from fluids.

•

Do not put your hand under the control console when moving it: Danger of injuries!

•

Trolley: never move the unit with blocked wheels, but block the wheels in the proximity of stairs
and ramps.

•

Place the unit always on horizontal ground and block the front wheels: Danger of tipping over and
rolling away.

•

In transporting the unit, raise the footrest: Danger of injuries!

•

The user manual must always be with the scanner system. It is the user's duty to ensure this!

•

Only probes conforming to type BF requirements may be used with the VOLUSON

®

730.

Voluson

®

730 - Instruction Manual

105838 Rev. 3

2-5

«
...
13
14
15
16
17
...
»

Содержание Voluson 730

































































































Отзывы:

Нет отзывов

Похожие инструкции для Voluson 730

Бренд: Tacx Страницы: 2

Бренд: C.E. Nierhoff & Co Страницы: 7

Бренд: QBC Diagnostics Страницы: 65

Бренд: ParaBody Страницы: 5

Бренд: Baileigh Industrial Страницы: 28

Бренд: Baileigh Industrial Страницы: 56

Бренд: Garmin Страницы: 2

Бренд: Halyard Страницы: 88

Бренд: HALDER Страницы: 2

Бренд: Hällde Страницы: 40

Бренд: Hällde Страницы: 6

Бренд: MagCore Страницы: 80

Бренд: MagCore Страницы: 80

Бренд: Varimixer Страницы: 28

Бренд: ubicquia Страницы: 4

VIMCO Sivoia SV-CCI-GRP

Бренд: Lutron Electronics Страницы: 2

Бренд: Garmin Страницы: 2

Бренд: Nady Audio Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды