GE M
EDICAL
S
YSTEMS
D
IRECTION
2300164-100, R
EVISION
7
V
IVID
™ 3 P
RO
/V
IVID
™ 3 S
ERVICE
M
ANUAL
Chapter 3 - Installation
3-57
3-7-5
Setting Up for Communication with a Prosolv Workstation
The Vivid™ 3 ultrasound unit can connect to a Prosolv DICOM viewer through a DICOM server. The
unit cannot connect directly to the viewer.
1) Setup the network connection, as described in the the
Setting Up the Network Connection
section,
on page 3-55.
2) Press
Config
on the alphanumeric keyboard. The
System Configuration
window is displayed.
3) Trackball to the
Connectivity
tab and press
Select
. The
Connectivity
tab is displayed, with the
Views
subsidiary tab selected by default, as shown in
Figure 3-36
on page 3-55.
4) Trackball to the
SERVICE
button at the bottom of the
Views
tab, and press
Select
. The password
request dialog box (shown in
Figure 3-37
on page 3-55) is displayed.
5) Enter the password
geulsservice
, and then trackball to the
OK
button and press
Select
.
6) Trackball to the
Services
tab and press
Select
. The
Services
tab is displayed, as shown below:
Figure 3-39 Services Tab
7) Select
DICOM Server
from the
Name
dropdown list. The
Services
tab is updated, as shown below
Figure 3-40 Services for DICOM Server
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
