GE Responder 1000, Инструкции по обслуживанию

Страница: 30 / 60

GE Medical Systems
Information Technologies
Responder 1000/1100 Page 30 / 38
Service Instruction
───────────────────────────────────────────────────────────────────
227 487 20 Rev G
Digital marker output
The trigger signal can be checked on the monitor screen. For this purpose, the Responder 1100
supplies a marker signal. Some patient monitors (e.g. Eagle 3000/4000) use this signal to
superimpose the trigger signal on the ECG waveform.)
•
output voltage VOH = 3.5V (min.) at 1 mA
VOL = 0.5 V (max.) at 1 mA
•
input impedance (min.) 200
Ω
nominal
•
output current 25 mA (max.)
•
pulse width (min.) >100 ms
Power
From the power line, design in compliance with protection class II requirements of IEC 601
Model for rated voltage of 230...240 V
•
operating voltage range 207...264 V, 49 to 65 Hz
•
rated current 0.5 A
Model for rated voltage of 115...120 V
•
operating voltage range 104 to 132 V, 49 to 65 Hz
•
rated current 1.0 A
Power for models with built-in rechargeable NiCd battery
•
rated voltage 18 V
•
rated capacity 600 mAh
•
charging time for depleted battery approximately 14 hours, overcharge protection
•
battery charging from built-in power supply also during line-power operation
•
a new and fully charged battery powers the defibrillator for approximately 25 defibrillation
shocks of 360 joules each (into 50 ohms) (with new, full charged battery at least 25 shocks at
an ambient temperature of 20 °C / 68 °F)
Operational readiness
2 s after power up (incl. Automatic selftest)
Operating position
any
Ambient conditions
•
Operation
Temperature between 0 and +40 °C
relative humidity between 10 and 95%, no condensation
atmospheric pressure between 700 and 1060 hPa
•
Storage and transport
Temperature between -30 and +60 °C
relative humidity between 10 and 95%, no condensation
atmospheric pressure between 500 to 1060 hPa