GE Responder 1000, Инструкции по обслуживанию

Страница: 12 / 60

GE Medical Systems
Information Technologies
Responder 1000/1100 Page 12 / 38
Service Instruction
─────────────────────────────────────────────────────────────── ────
227 487 20 Rev G
3 Interfaces nterfaces
3.1 Internal Interfaces 3.1 Internal Interfaces
Interface signal PCB Responder 1000/1100 Interface signal PCB Responder 1000/1100
connector : BattLoad1 connector : BattLoad1
function: connector to battery module
type: MODUI 6pol
signal name level active I/O meaning
1 Usec1 +18..30V - Output charging voltage
2 GND 0V - - Ground
3 +5V +5V - Output 5V
4 BATTMINIM +5V High Input battery Low signal
5 BATTCHARGE +18..25V - Input battery charge signal
6 BATTLEER - - Input battery empty signal
connector : Sync
function: connector to Sync input.
type: MODUII 6pol
signal name level active I/O meaning
1 ECG1V - Input 1V ECG
2 DIG_GND 0V - - digital Ground
3 SYNEXT L->H Input trigger signal extern monitors
4 MARKOUT High Output marker signal
5 AN_GND 0V - - analog Ground
6 SYNCABLE CMOS Low Input cable detection
connector : HV_Trafo_Pri
function: connector to High Voltage transformer
type: 4,8 x 0,8
signal name level active I/O meaning
2 HV_TRAFO_PRI/2 - - - "passive end" of transformer winding
1 HV_TRAFO_PRI/1 - - - "active end" of transformer winding
connector : HVCapConn
function: connector to High Voltage Capacitor
type: 4,8 x 0,8
signal name level active I/O meaning
- KO_PLUS - + - plus terminal
- KO_NEG - - - minus terminal
connector : KeyConn
function: connector to keypad