GE Profile PGS968, Техническое обслуживание руководство

Страница: 38 / 80

– 38 –
Hinge Receiver
The oven door hinge receiver is attached to the
frame with two T-15 Torx screws. To replace it
requires removing the range from the installation.
(See
Range Remova
l .)
Door Switch
The oven utilizes a door switch located on the right
side of the door frame that is accessible from the
front. The door switch monitors the position of the
oven door and provides this information to the
oven's control board.
To remove the door switch:
Disconnect power to the range. 1.
Pull the switch forward to locate the ends of two 2.
spring clips (one on each side).
Insert a small fl at-blade screwdriver on one 3.
of two spring clips and depress the spring clip
while pulling the switch from the door frame.
Insert the small fl at-blade screwdriver on the 4.
other spring clip, depress the spring clip, and
continue pulling the switch from the door frame.
Disconnect the door switch wire harness. 5.