– 22 –
12-Hour, 24-Hour or Clock Blackout
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour
military time clock or black out the clock
display, follow the steps below.
Touch the
BROIL HI/LO
and
BAKE
pads at the same time for 3 seconds
until the display shows
SF.
Touch the
CLOCK
pad once. The
display will show
12 hr.
If this is
the choice you want, touch the
START
pad.
Touch the
CLOCK
pad again to change
to the 24 hour military time clock. The
display will show
24 hr.
If this is the choice
you want, touch the
START
pad.
Touch the
CLOCK
pad again to black out
the clock display. The display will show
OFF.
If this is the choice you want, touch
the
START
pad.
NOTE:
If the clock is in the black-out mode, you
will not be able to use the Delay Start function.
+
Tone Volume
This feature allows you to adjust the tone
volumes to a more acceptable volume. There are
three possible volume levels.
Touch the
BROIL HI/LO
and
BAKE
pads at the same time for 3 seconds,
until the display shows
SF
.
Touch the
OVEN LIGHT ON/OFF
pad.
The display will show
2 BEEP
. This is
the high volume level.
Touch the
OVEN LIGHT ON/OFF
pad
again. The display will show
3 BEEP.
This is the loudest volume level.
Touch the
OVEN LIGHT ON/OFF
pad
again. The display will show
1 BEEP
.
This is the quietest volume level.
For each time the level is changed,
a tone will sound to provide an
indication of the volume level.
Choose the desired sound level
(
1 BEEP, 2 BEEP, 3 BEEP
).
Touch the
START
pad to activate the
level shown.
+
Cook and Hold
(on some models)
Your control has a cook and hold feature that
keeps cooked foods warm for up to 3 hours after
Timed Baking or Roasting is finished.
NOTE:
This feature can only be programmed to
work with Timed Baking or Roasting. (See the
Using the timed baking or roasting features
section.) After Timed Baking or Roasting has
automatically stopped, the programmed cook
and hold will automatically start.
To activate this feature for use after
Timed Baking or Roasting, follow the
steps below.
Touch the
BROIL HI/LO
and
BAKE
pads at the same time for 3 seconds
until the display shows
SF.
Touch the
COOKING TIME
pad.
The display will show
Hld OFF.
Touch the
COOKING TIME
pad again
to activate the feature. The display
will show
Hld ON.
Touch the
START
pad to activate
the cook and hold feature and
leave the control set in this special
features mode.
NOTE:
The control will beep every 6 seconds
if the Cook and Hold feature is set to remind you
that food is in the oven. Touch the
CLEAR/OFF
pad and remove food when desired. This
reminder will not work if the tones at the
end of a timed cycle were cancelled. See
the Tones at the End of a Timed Cycle in
this Special Features section.
Содержание Profile PGS968
Страница 74: ... 74 Continued next page PGS908 Schematic ...
Страница 76: ... 76 Continued next page PGS968 Schematic ...
Страница 77: ... 77 THERMAL SWITCH THERMAL LINE BREAK PGS975 Wiring Diagram Continued next page ...
Страница 78: ... 78 PGS975 Schematic ...