GE Profile PGS968, Техническое обслуживание руководство

Страница: 14 / 80

– 14 –
Your control will allow you to lock out the touch
pads so they cannot be activated when pressed.
To lock/unlock the controls:
Touch the
9
and
0
pads at the same
time for 3 seconds, until the display
shows
LOC ON .
To unlock the control, touch the 9
and
0
pads at the same time for 3
seconds, until the display shows
LOC OFF .
When this feature is on and the touch
pads are touched, the control will beep
and the display will show
LOC ON .
■
The control lock-out mode affects all touch
pads. No touch pads will work when this
feature is activated.
■
The adjustment will be retained in memory
after a power failure.
Control Lock-Out
(on some models)
Insert the probe into the food.
Plug the probe into the outlet in the
oven. Make sure it’s pushed all the
way in. Close the oven door. Make
sure the probe cable is not touching
the broil element.
Touch the
PROBE
pad.
Touch the number pads to set
the desired internal food or meat
temperature. The maximum
internal temperature for the food
that you can set is 200ºF (93°C).
Touch the
BAKE
pad.
Touch the number pads to set the
desired oven temperature.
Touch the
START
pad.
The display will flash if the probe is inserted
into the outlet and you have not set a probe
temperature and touched the
START pad.
After the internal temperature of
the food reaches 100°F (38°C), the
changing internal temperature will be
shown in the display.
When the internal temperature of
the food reaches the number you
have set, the probe and the oven
turn off and the oven control
signals. To stop the signal, touch the
CLEAR/OFF
pad. Use hot pads to
remove the probe from the food.
Do not use tongs to pull on it—they
might damage it.
To change the oven temperature during
the Roast cycle, touch the
BAKE
pad and
then the number pads to set the new
temperature.
■
If the probe is removed from the food before
the final temperature is reached, a tone will
sound and the display will flash until the probe
is removed from the oven.
■
You can use the timer even though you
cannot use timed oven operations while
using the probe.
19
How to Set the Oven For Roasting When Using the Probe