INSTALE UN CONDUCTO FLEXIBLE
DE 3/4
″
ANTES DE HACER CONEXIONES
ELÉCTRICAS
Nota al electricista: Los conductores proporcionados con
este electrodoméstico son reconocidos por la UL para
conexiones eléctricas residenciales de calibres altos.
El aislamiento de estos conductores es considerado a
temperaturas mucho mayores que las esperadas en
residencias. La capacidad de carga actual de un conductor
es determinado por el calibre del cable y también por la
temperatura considerada del aislamiento alrededor del
cable.
Alambre de aluminio –
ADVERTENCIA:
UNA CONEXIÓN DEL ALAMBRE DE ALUMINIO RESIDENCIAL
INAPROPIADA A CONDUCTORES DE COBRE PUEDE
RESULTAR EN PROBLEMAS SERIOS.
Una los alambres de aluminio y los alambres de cobre
usando conectadores especialmente diseñados y
reconocidos por UL para unir cobre y aluminio. Siga el
procedimiento recomendado por el fabricante de los
conectadores muy de cerca.
Onda de servicio – Deje una onda en el alambre de la estufa
de forma tal que la estufa pueda ser levantada 12 pulgadas
sin tener que desconectarse del alambrado.
Conductores
del suministro
eléctrico
Bushing anti-
cortocircuito
Conducto
CONEXIONES ELÉCTRICAS
17
18
REQUISITOS ELÉCTRICOS*
# Modelo
Voltaje
Frecuencia
KW
PP989
120/240V
60Hz
9.1KW
120/208V
60Hz
6.9KW
*Para referencia solamente. Verifique con la plato de
especificación del producto.
Alimente los conductores
para el suministro
eléctrico a través del
conducto; cerciórese de
dejar suficiente longitud
para conectar
apropiadamente estos
conductores
a los conductores
eléctricos de la estufa.
Envuelva los
conductores a
través del bushing
o cojinete anti-
cortocircuitos y asiente
firmemente el bushing en
el extremo del conducto.
Alimente los conductores
a través del agujero en el
compartimiento de
alambre.
Conforme lo permitan los
códigos locales, compre
un conectador de
conducto apropiado para
el tamaño del conducto.
Inserte el conducto a
través del conectador y
péguelo a la cubierta.
Deje un huelgo suficiente
para poder pegar los
cables fácilmente con los
cables de la estufa.
Nota: No Instale la estufa
sin un conectador de
conducto certificado. El
conectador de conducto
debería instalarse antes
de reinstalar la cubierta
de cables.
Cuando haya
completado
el proceso, reinstale
la cubierta del
compartimiento
de los cables.
25
Bushing (asentado completamente)
Remueva los tornillos que sostienen la
cubierta del compartimiento del
alambre y remueva la cubierta.
Conectador
de conducto
Conducto
Cubierta
Instrucciones de instalación
Plato de
especificación
El Kit de instalación eléctrica JXCK89 puede ordenarse
por separado e incluye todas las partes necesarias para
conectar la estufa a un alambrado típico.