Cuidado y limpieza de la estufa.
Cerciórese de que el suministro eléctrico esté suspendido y que todas las superficies están frías antes de
limpiar cualquier parte de la estufa.
Botones de control
Las perillas de control pueden quitarse para
limpiarse.
Para limpiar las perillas, cerciórese de que estén
en la posición de OFF (Apagado) Hale cada
perilla hacia fuera del vástago.
Para limpiar las perillas, colóquelos en un
lavaplatos o realice la limpieza con agua
y jabón. Enjuague con agua limpia. Asegúrese
que los interiores de las perillas estén secos
antes de volver a colocarlas.
Cuando reemplace las perillas, revise que estén
en la posición de OFF (Apagado) para garantizar
la colocación correcta.
10
Instrucciones de
seguridad
Instrucciones de
operación
Cuidado y limpieza
Solución e identificación
de av
erías
Apoyo al consumidor
Cámara y filtro de ventilación
Área sombreada
Remueva y reemplace el filtro diagonalmente a través
de la abertura de ventilación.
Para ordenar filtros, por favor llámenos gratuitamente al número:
Centro de partes nacional.............................................800.626.2002
Filtro ...................................................................................# WB02X10651
Cuando se encuentre reemplazando el filtro, cerciórese de que
descanse, en un ángulo, en los soportes en la abertura de
ventilación.
No opere la ventilación sin el filtro en su lugar.
Para limpiar la cámara de ventilación, use agua
caliente y enjabonada. Enjuague con agua limpia y
seque bien. No use limpiadores abrasivos; dañarán el
acabado. Reemplace el filtro después de que lo limpie y
lo seque.
Cámara de
ventilación
Filtro de
ventilación
Rejilla de ventilación
Antes de limpiar la rejilla de ventilación, asegúrese de
que el ventilador de salida esté apagado.
Para limpiar la rejilla de ventilación, quítela de la
estufa levantándola hacia arriba y afuera. Límpiela con un
paño húmedo. Si fuera necesario, la rejilla de ventilación
puede lavarse en el fregadero. Utilice líquido de lavaplatos
para lavar. No utilice limpiadores abrasivos. Dañarán el
acabado de la rejilla de ventilación. No lave la rejilla de
ventilación en el lavaplatos.
Cómo quitar el envoltorio de protección y la cinta de embalaje
Con cuidado tome una punta del envoltorio de protección
con sus dedos y lentamente quítelo de la superficie del
artefacto. No use elementos filosos para quitar el envoltorio.
Quite todo el envoltorio antes de usar el artefacto por
primera vez.
Para asegurarse de no dañar el acabado del producto, la
mejor forma de quitar el pegamento de la cinta de empaque
de los aparatos nuevos consiste en aplicar detergente para
vajillas líquido. Aplique con un paño suave y deje remojar.
NOTA: Debe retirarse el adhesivo de todas las partes. Si se
calienta, será imposible de quitar.
El filtro es sostenido en su lugar en un ángulo con una
protuberancia de tope. Levante el filtro y extráigalo de la abertura
de ventilación diagonalmente.
Para limpiar el filtro, agítelo en agua caliente y enjabonada.
Enjuáguelo bien y séquelo completamente.
No opere la ventilación sin el filtro en su lugar.
Superficies de Acero Inoxidable
(en algunos modelos)
No use virutas de acero; éstas dañarán la superficie.
Para limpiar la superficie de acero inoxidable, use agua
tibia con jabón o un limpiador o pulidor para acero
inoxidable. Siempre limpie la superficie en la dirección del
veteado. Siga las instrucciones del limpiador para limpiar
la superficie de acero inoxidable.
Para consultar sobre la compra de limpiadores o lustradores
de aparatos de acero inoxidable, o para encontrar la
ubicación del distribuidor más cercano, llame a nuestro
número gratuito:
Centro de partes nacional ................................1.800.626.2002
ge.com