BLOWER ELECTRICAL
CONNECTIONS (cont.)
• Connect the 5-pin plug on the blower assembly
to the matching 5-pin receptacle on the bottom
of the wire enclosure.
• Fold all wires into the electrical enclosure. Secure
the enclosure with the screws removed earlier,
making sure that no wires are trapped
.
ATTACHING A BLOWER
TRANSITION DUCT
Use a blower transition duct for all downward duct
installations to connect to 6
″
round standard
ductwork. This 3
1
⁄
4
″
x 10
″
rectangle to 6
″
round
transition duct is available at your local building
supply store.
Remove the cardboard packing in the blower outlet.
Install the transition duct to the blower outlet. Secure
all joints with duct tape to assure an airtight seal.
24
Screws
Screw
(on other
side)
14
CONNECTING THE DUCTWORK
Connect the ductwork prepared in Steps 5 and 6 to
the blower transition duct.
15
16
INSTALLING THE COOKTOP
5-pin
connectors
Electrical
enclosure
Flexible
conduit
5-pin
connectors
Installation Instructions
BLOWER ELECTRICAL
CONNECTIONS
• Loosen the two screws and remove and
discard the sheet metal strap covering the 5-pin
connector on the cooktop bottom. Save the
screws for reinstallation later.
16
Remove screws
and discard strap