Lea estas instrucciones completa y
cuidadosamente.
•
IMPORTANTE –
Guarde estas
instrucciones para ser usadas por el inspector
eléctrico.
•
IMPORTANTE –
Observe todos los
códigos y ordenanzas aplicables.
• Nota al instalador – Cerciórese de dejar estas
instrucciones con el Consumidor.
• Nota al consumidor – Guarde estas
instrucciones para referencia futura.
• A no ser que usted sea una persona muy bien
entrenada en la instalación de este producto,
busque la ayuda de un instalador profesional.
• La instalación apropiada es la responsabilidad
del instalador.
• Si este producto falla por una instalación
inapropiada, la Garantía no cubrirá este
producto.
Instrucciones
Estufa radiante de
de instalación
ventilación descendente
Si tiene alguna pregunta, llame al 800.GE.CARES (800.432.2737) o visite nuestro sitio en la Web: ge.com
ANTES DE COMENZAR
13
ADVERTENCIA –
Antes de comenzar la
instalación, desconecte el interruptor de
suministro eléctrico en el panel de servicio y
cierre el mecanismo de seguridad para evitar
que alguien lo conecte accidentalmente.
Cuando no exista un dispositivo de cierre de
seguridad, amarre un aviso visible, como una
etiqueta al panel de servicio haciendo la
advertencia.
ADVERTENCIA –
PARA REDUCIR EL
RIESGO DE INCENDIOS, SOLAMENTE USE
CONDUCTOS METÁLICOS.
INSTRUCCIONES IMPORTANTES DE
SEGURIDAD
ADVERTENCIA –
PARA REDUCIR EL
RIESGO DE INCENDIOS, DESCARGAS
ELÉCTRICAS O LESIONES PERSONALES,
OBSERVE LO SIGUIENTE:
El trabajo de instalación y el alambrado
eléctrico debe hacerlo una persona(s)
calificada conforme a todos los códigos
y estándares aplicables, incluyendo una
construcción aprobada por el inspector de
incendios.
Suficiente aire es necesario para una
combustión apropiada y para deshacerse de
los gases a través de una salida de humo
(chimenea) de equipos que queman
combustibles para prevenir retroalimentación.
Siga las recomendaciones del fabricante
del equipo de calentamiento y los estándares
de seguridad tales como los publicados por la
Asociación nacional de protección de
incendios (NFPA), y la Sociedad americana de
ingenieros de calefacción, acondicionadores
de aire y refrigeración (ASHRAE), y los códigos
de las autoridades locales.
Cuando se encuentre cortando o taladrando
en la pared o en el techo, no dañe los
alambrados eléctricos u otras utilidades
escondidas.
Los ventiladores conectados a conductos
deben siempre estar ventilados hacia el
exterior.
• La unidad debe estar conectada a tierra
apropiadamente.
D
C
B
A