– 54 –
5. Remove the 2 hex-head screws that attach the
vent tube to the top of the oven liner.
6. Grasp and carefully remove the vent tube from
under the rear wire insulation retainer.
7. Compress and push up the 4 tabs that lock the
smoke eliminator to the top of the oven cavity.
Tabs (1 of 4)
Vent Tube
Smoke Eliminator
Rear Wire
Insulation
Retainer
Oven Light Assembly
The oven is equipped with a halogen light assembly.
The oven door switch monitors the position of the
oven door and provides this information to the
control board. The control board operates the light
relay located on the control board. The light comes
on when the door is opened or when the oven is in
a cooking cycle. The oven light does not come on
during self-cleaning.
The light assembly consists of a removable light
cover, a light lens with halogen bulb, and socket
located on the ceiling of the oven.
Oven Light Assembly PHS925
Lower Oven Light Assembly PS978
To remove the light assembly:
1. Disconnect power and remove the two 1/4-in.
hex-head screws that attach the light assembly
to the oven ceiling.
2. Pull the light assembly and wiring down from
the oven ceiling approximately 2 inches.
3. Cut the wires and splice the new light assembly
using approved heat resistant connectors.
Note:
Upon reassembly, ensure displaced insulation
around the wiring entry hole is returned to its
original position.
(
Continued next page
)
