manualshive.com logo in svg

GE PHS925ST1SS, Техническое обслуживание руководство

Поделиться
Скачать
GE PHS925ST1SS Скачать руководство пользователя страница 4

– 4 –

Introduction

The Pro

fi

 le 30-in. Slide-In Induction Range with convection oven and warming drawer features electronic 

oven and induction element controls. The induction elements provide unmatched cooking performance and 

fl

 exibility. Induction technology heats only the pan and its contents and offers energy ef

fi

 ciency by reducing 

wasted heat when compared to radiant and gas cooktops.

The Pro

fi

 le 30-in. Slide-in Induction Range has the following new features:

• Innovative 

technology

―

delivers the responsiveness of a gas cooktop. 

• Superior 

performance

―

induction technology heats only the pan and 

its contents, providing an incredibly fast boil time. 

• Remarkable 

versatility

―

this induction cooktop offers the choice of 

19 different power levels, including a 3700-watt, 11" element for large 
cookware , warming capability, and a low-heat simmer setting for 
delicate sauces.

•  Cooler cooktop surface

―

since there is not a traditional thermal 

heating element, the induction cooktop stays cooler than conventional 
radiant cooktops.

•  Below cooktop venting

―

dissipates heat, permitting less depth to the 

burner box.

• Easy 

cleanability

―

cooktop cleaning is easier since spills and splatters do not burn on the cooktop.  

•  Electronically controlled oven heating 

elements

―

provide precise cooking control with 

fast preheating. 

•  Convection mode uses reverse-air convection 

technology

―

a bidirectional fan that works with 

a dedicated third heating element to promote 
even heat circulation. 

•  Performance compensation for 208-volt 

installation

―

boosts power as needed in 

multifamily dwellings.

•  Cooktop locked out during self clean

•  Hidden oven bake element

―

concealed 

beneath the oven 

fl

 oor, allows quick and easy 

ash removal following the self-clean cycle. 

•  Two nickel-plated sliding extension racks

Model PHS925

(

Continued next page

)

Содержание PHS925ST1SS























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды