– 46 –
Warming Drawer Element
•
The warming drawer element is rated at 400
watts, has an approximate resistance value of
36
Ω
, and draws approximately 3.3 amps.
• The element is located on the
fl
oor of the
warming drawer compartment. The element
terminals are located behind the element
terminal cover.
To remove the warming drawer element:
Disconnect power to the range.
1.
Remove the range from the installation.
2.
Remove the three 1/4-in. hex-head screws and
3.
the element terminal cover from the back of the
range.
4. Disconnect the 2 element wires.
5. Remove the two 1/4-in. hex-head screws that
attach the element to the back wall.
6. Using
a
fl
at blade screwdriver, lift the tabs on
each of the 2 clips and remove the element.
Cover
Disconnect
Disconnect
Clip
Warming Drawer Temperature Characteristics
Hi
Warmer On Time
90 seconds
Warmer Off Time
119
seconds
100% First Rise On Time
900
seconds
Std
Warmer On Time
78 seconds
Warmer Off Time
131
seconds
100% First Rise On Time
850
seconds
Lo
Warmer On Time
66 seconds
Warmer Off Time
142
seconds
100% First Rise On Time
800
seconds
Warming drawer temperatures are controlled by
duty cycling algorithms.
Low Temperature = 165° +/- 25°F.
Standard Temperature = 175° +/- 25°F.
High Temperature = 180° +/- 25°F.
