25
Installation Instructions
InStAllInG tHE CooKtoP
InStAllInG tHE CooKtoP
Lift the cooktop by the glass side edges as shown .
notE:
Do not use the glass top vent opening to lift
or move the cooktop into position .
Lower the cooktop into the countertop opening,
guiding it into position . Glass is fragile—do not allow
it to drop onto the countertop . Support from the
underside and lower slowly .
Carefully remove your fingers one corner at a time
to lower the cooktop into position .
notE: Do not
use Silicone RTV or caulk to bond
cooktop glass to countertop .
CHECKInG For FlAtnESS
Inspect the cooktop glass for rocking or uneven
gap on all four sides at the countertop surface .
Do not attempt to force the glass to meet the
countertop .
Check for
uneven gaps
CAutIon:
Do not lIFt From
VEnt oPEnInG.
8
9
InStAllInG tHE oPtIonAl
InStAllAtIon BrACKEtS
notE:
Check for glass flatness in Step 9 before
installing optional installation brackets .
To order optional installation brackets/thumb screws,
call the National Parts Center at 800 .626 .2002 .
Order two of each part: WB02X11331 Bracket
WB01X10353 Screw
To install optional installation brackets:
Remove 2 screws on both sides under cooktop .
Align optional installation bracket under cooktop
and reinstall screws through the slot in the bracket .
Do this on both sides of the cooktop .
Thread the thumb screw through the hole in the
bracket and tighten to secure the cooktop to the
countertop . Repeat on the other side .
ImPortAnt:
Turn thumb screw until it touches the
bottom of the countertop . Do not overtighten .
Optional installation
bracket and thumb
screw (not included)
Cooktop
Countertop
10
Screws supplied with
cooktop
Thumb screw
Содержание PGP989
Страница 33: ...33 Notes GEAppliances com...
Страница 34: ...Notes 34...
Страница 70: ...34 Notas...