background image

USING THE QUICK ARM  (Optional, see page 1) 
The Quick Arm feature may be used if it is enabled. Quick Arm will allow the 

user to arm the security system in the AWAY mode by pressing the [EXIT

key, or arm in the STAY mode by pressing the [STAY] key.  This feature is 

used for ARMING ONLY, and will not disarm the security system.  This is 

ideal for a maid or baby sitter code, etc. 

 

 
CHANGING MODES WHILE SYSTEM IS ARMED 

 

Pressing the [STAY] key will turn on/off (toggle) a delay on entry/exit 

doors and turn on/off (toggle) the instant light

 

(Optional)  Press the [BYPASS] key at this time to turn on/off (toggle) 

all designated interior zones.  

 

(Optional)  When armed, pressing the [EXIT] key will start the exit 

delay, enabling you to leave the building.  

 

IMPORTANT! 

The  instant light  needs  to  be  off  at  this  time  if  you  plan  on  re-

entering the building; otherwise you will create an alarm. You may 

restore an entry delay by pressing the [STAY] key again. 

 

 
DISARMING THE SYSTEM 
When you enter the protected area through one of the designated Entry/Exit 

doors, the keypad control will sound a continuous tone for the duration of 

the entry delay time, or until you enter a valid code.  The red armed light 

will go off and the tone will stop. The security system is now DISARMED.  If 

a valid code is not entered before the end of the entry delay, an alarm will 

occur.  (NOTE:    If the red armed light is flashing during the entry 

delay, the alarm system has been activated in your absence. Leave 

the building immediately and call your alarm company and/or the 

police from a safe location.) 

 

 
CANCEL / ABORT FEATURE  (Optional, see page 1) 
The cancel light will flash during an abort delay time.  If a code is entered 

followed by the [CANCEL] key while this light is flashing, all abortable 

reports will stop the communication process. Entering a code followed by 

the [CANCEL] key during or after an alarm report to the central station will 

cause the cancel light to come on. It will stay on until the central station has 

received the cancel report. 

 

Page 9 

Содержание NetworX NX-1500E
























Отзывы: