GE NetworX NX-1500E, Руководство пользователя

Страница: 18 / 23

Time Hour Code Time Hour Code Time Hour Code
12:00
Midnight
00
8:00 AM
08
4:00 PM
16
1:00 AM 01
9:00 AM
09
5:00 PM
17
2:00 AM 02
10:00 AM
10
6:00 PM
18
3:00 AM 03
11:00 AM
11
7:00 PM
19
4:00 AM 04
12:00
Noon
12
8:00 PM
20
5:00 AM 05
1:00 PM
13
9:00 PM
21
6:00 AM 06
2:00 PM
14
10:00 PM
22
7:00 AM 07
3:00 PM
15
11:00 PM
23
SETTING THE KEYPAD LIGHTING
Step 1
Press [
r
]-[9]-[1]. The service light will flash.
Step 2 Press the [1] key to lighten, or press the [2] key to darken the
illumination behind the buttons. It is usually easier to set this
adjustment in a darkened room.
SERVICE MENU
The service light will be “on” if the security system requires service. If the
service light is “on”, press the [
r
] key followed by the [2] key to determine
the service condition. One or more zone lights will illuminate indicating
what service(s) is required. Call your service provider immediately for these
problems. Below is a listing of what each light means in a service condition.
TO EXIT THE SERVICE LIGHT MODE - PRESS THE [#] KEY.
LIGHT PROBLEM
1 SYSTEM FAULT - Press the [1] key. The zone light(s) that is
illuminated corresponds to the system fault(s) below:
1 Over Current Fault
2 Siren Trouble
3 Box Tamper
4 Expander Power
5 Expander Low Battery
6 Expander Box Tamper
7 Expander Trouble
8 Ground Fault
Note: Faults 1 & 2 are global in nature and will affect all
partitions of a multi-partition system. Press the [#] key to
return to the 1 of 8 service lights.
2 ZONE TAMPER - Press the [2] key and the zone light(s) will
illuminate showing the zone(s) that are tampered. Press the [#]
key to return to the 1 of 8 service lights.
Page 17