manualshive.com logo in svg

GE Multinet 4, Инструкция по эксплуатации

"GE Mutlinet 4" - надежный и многофункциональный сетевой анализатор, способный удовлетворить все ваши потребности. Откройте мир возможностей с нашим Instruction Manual, который можно бесплатно скачать с manualshive.com. Получите мгновенный доступ к полному руководству и начните использовать ваше устройство максимально эффективно.

Поделиться
Скачать
background image

B–8

MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL

THIRD PARTY LICENSES

CHAPTER B: THIRD PARTY LICENSES

License, they do not excuse you from the conditions of this License. If you cannot 
distribute so as to satisfy simultaneously your obligations under this License and any 
other pertinent obligations, then as a consequence you may not distribute the Library 
at all. For example, if a patent license would not permit royalty-free redistribution of 
the Library by all those who receive copies directly or indirectly through you, then the 
only way you could satisfy both it and this License would be to refrain entirely from 
distribution of the Library. 

If any portion of this section is held invalid or unenforceable under any particular 
circumstance, the balance of the section is intended to apply, and the section as a 
whole is intended to apply in other circumstances. 

It is not the purpose of this section to induce you to infringe any patents or other 
property right claims or to contest validity of any such claims; this section has the sole 
purpose of protecting the integrity of the free software distribution system which is 
implemented by public license practices. Many people have made generous 
contributions to the wide range of software distributed through that system in 
reliance on consistent application of that system; it is up to the author/donor to 
decide if he or she is willing to distribute software through any other system and a 
licensee cannot impose that choice. 

This section is intended to make thoroughly clear what is believed to be a 
consequence of the rest of this License. 

7.

If the distribution and/or use of the Library is restricted in certain countries either by 
patents or by copyrighted interfaces, the original copyright holder who places the 
Library under this License may add an explicit geographical distribution limitation 
excluding those countries, so that distribution is permitted only in or among countries 
not thus excluded. In such case, this License incorporates the limitation as if written in 
the body of this License. 

8.

The Free Software Foundation may publish revised and/or new versions of the Lesser 
General Public License from time to time. Such new versions will be similar in spirit to 
the present version, but may differ in detail to address new problems or concerns. 

Each version is given a distinguishing version number. If the Library specifies a version 
number of this License which applies to it and "any later version", you have the option 
of following the terms and conditions either of that version or of any later version 
published by the Free Software Foundation. If the Library does not specify a license 
version number, you may choose any version ever published by the Free Software 
Foundation. 

9.

If you wish to incorporate parts of the Library into other free programs whose 
distribution conditions are incompatible with these, write to the author to ask for 
permission. For software which is copyrighted by the Free Software Foundation, write 
to the Free Software Foundation; we sometimes make exceptions for this. Our decision 
will be guided by the two goals of preserving the free status of all derivatives of our 
free software and of promoting the sharing and reuse of software generally. 

B.2.1 NO WARRANTY 

10. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR 

THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN 
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES 

Содержание Multinet 4































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Multinet 4

3Com 4210 Series Datasheet preview
4210 Series
Бренд: 3Com Страницы: 8
3Com PathBuilder S200 Series Feature Manual preview
PathBuilder S200 Series
Бренд: 3Com Страницы: 11
3Com 4400 Datasheet preview
4400
Бренд: 3Com Страницы: 8
3Com CoreBuilder 3500 Getting Started Manual preview
CoreBuilder 3500
Бренд: 3Com Страницы: 96
N-Tron 608MFX-ST Specifications preview
608MFX-ST
Бренд: N-Tron Страницы: 2
Magnetrol C29 Installation And Operating Manual preview
C29
Бренд: Magnetrol Страницы: 24
Xenteq PTS Series Instruction Manual preview
PTS Series
Бренд: Xenteq Страницы: 22
Little Giant ACS-3 Installation, Operation, Maintenance & Repair Parts preview
ACS-3
Бренд: Little Giant Страницы: 2
NBase Communications NH2001M Installation And User Manual preview
NH2001M
Бренд: NBase Communications Страницы: 72
Lindy 32586 Quick Start Manual preview
32586
Бренд: Lindy Страницы: 2
Talkswitch CT.TS005.003902 User Manual preview
CT.TS005.003902
Бренд: Talkswitch Страницы: 309
Lantech IPES-5222T Series User Manual preview
IPES-5222T Series
Бренд: Lantech Страницы: 30
Crestron CLW-SW1/4RF Operation Manual preview
CLW-SW1/4RF
Бренд: Crestron Страницы: 36
DX Engineering RR8B-HP Manual preview
RR8B-HP
Бренд: DX Engineering Страницы: 4
T.I.P. TLS 100 E Manual preview
TLS 100 E
Бренд: T.I.P. Страницы: 42
H3C S9820-64H Manual preview
S9820-64H
Бренд: H3C Страницы: 39
KDS KD-MSW8x3 Operating Instructions Manual preview
KD-MSW8x3
Бренд: KDS Страницы: 10
Kramer VP-443 User Manual preview
VP-443
Бренд: Kramer Страницы: 29

Бренды по названию

Популярные бренды

Загрузить еще бренды