10
THE BASIC REVERSE OSMOSIS SYSTEM
Rev D
STEP 2: INSTALL DRAIN ADAPTER
Follow the instructions in the Appendix for installation of the Drain
Boa™, if used.
The drain adapter is designed to fit 1-1/2-inch (3.8 cm) sink drain pipe.
The adapter installs directly to the sink tailpiece.
STEP 3: INSTALL FAUCET
A. Prepare Mounting Hole
1. Select a location for the faucet. Be sure it will fit flat against the sink
or counter and that there is space underneath for tubing.
2. If drilling is needed, make a 1-1/8-inch to 1-1/4-inch diameter hole.
Figure 3
WARNING:
To avoid damaging a sink, consult a qualified plumber
or installer for the proper method of drilling holes in porcelain or
stainless steel.
Gasket
Air Gap Module
Trim Ring
Standoff
Washer
Nut
Water In Connection
Horseshoe
Clip
Содержание Merlin
Страница 2: ...2 Rev D...
Страница 21: ...APPENDIX 21 Rev D APPENDIX...
Страница 26: ...26 DIMENSIONS Rev D...