PondKeeper
System Instructions
Congratulations
on your new
PondKeeper
System
Your filter system was designed to go together easily even for a
novice. Each of the components was carefully chosen to provide you with
years of dependable service and clear water for you and your pond.
Take a few minutes to look at this manual and familiarize yourself
with each of the components and what part they play in the PLUS system.
Due to the custom nature of these systems your components may
differ slightly from the various components shown, but assembly of the
system is basically the same.
You have with this system the following components:
PondKeeper
bio-mechanical filter
Dynamo 2 speed Water pump (can be one of a variety)
ZapTek2
Ultraviolet light
Plumbing parts
Media Agitator
Equipment pad
Getting to know your
PondKeeper
System
Taking a few minutes to get to know the different compo-
nents of your PondKeeper System will assure that you are
using it to it’s maximum potential.
Assembly of your
PondKeeper
System
Step 1: Start by laying the Pad on level ground where you want to lo-
cate the equipment.
Note: Locating the equipment as close as possible or below the surface grade(water
level) of the pond will result in best results. Distance from the pond is not as critical as
the distance above the surface grade.
(over)
If you need any help
feel free to give us a
call 866.712.7007
PondKeeper
Filter
Water Drain
Equipment
Pad
ZapTek UV
Sight glass
ZapTek2
Stainless
Steel UV
Filter Unions
Water pump
(Various)
2 speed shown
Multiport
Backwash valve
Media
Agitator
