GE MDS iNET 900, Справочное руководство

Страница: 78 / 188

68 iNET Series Reference Manual 05-2806A01, Rev. J
•
Flow Control
(COM2 only)—RTS/CTS handshaking between
the transceiver and the connected device.
[
Enable, Disable; Disabled
]
•
Serial Mode
— When seamless mode is selected, data bytes
will be sent over the air as quickly as possible, but the
receiver will buffer the data until enough bytes have arrived
to cover worst case gaps in transmission. The delay intro-
duced by data buffering may range from 22 to 44 ms, but the
radio will not create any gaps in the output data stream. This
mode of operation is required for protocols such as MOD-
BUS™ that do not allow gaps in their data transmission.
[
Seamless, Custom; Seamless
]
•
Seamless Inter-Frame Delay
— Number of characters that repre-
sent the end of a message (inter-character time-out). MOD-
BUS defines a “3.5-character” parameter. [
1–65,535; 4
]
•
Custom Data Buffer Size
(Custom Packet Mode only)—Maxi-
mum amount of characters, that the Remote end will buffer
locally before starting to transmit data through the serial port.
[
16, 32, 64, 128, 256; 32
]
•
Commit Changes and Exit Wizard
—Save and execute changes
made on this screen (Shown only after changes have been
entered.)
2.6.4 Configuring for TCP Mode
Invisible place holder
Figure 2-34. TCP Client Menu (Remote)
•
Status
—Enable/Disable the serial data port.
•
IP Protocol
—TCP Client. This is the type of IP port that will
be offered by the transceiver’s serial device server. [
TCP, UDP,
PPP; TCP
]