GE MDS iNET 900, Справочное руководство

Страница: 38 / 188

28 iNET Series Reference Manual 05-2806A01, Rev. J
3. Press the key to receive the
login:
prompt.
4. Enter the username (default username is
iNET
or
iNET-II
, in accor-
dance with radio model). Press .
5. Enter your password (default password is
admin
). (For security, your
password keystrokes do not appear on the screen.) Press .
NOTE:
Passwords are case sensitive. Do not use punctuation mark
characters. You may use up to eight alpha-numeric characters.
The unit responds with the Starting Information Screen (Figure 2-6).
From here, you can review basic information about the unit or press
G
to proceed to the Main Menu.
Invisible place holder
Figure 2-6. Starting Information Screen—Local Console Session
(Telnet has similar menu structure)
Starting a Telnet
Session
NOTE:
This method requires that you know the IP address of the unit
beforehand. If you do not know the address, use the Local
Console method (above) and access the
Starting Information
Screen . The address is displayed on this screen.
1. Connect a PC to the unit’s
LAN
port, either directly or via a network.
If connecting directly, use an Ethernet crossover cable; if
connecting via a network, use a straight-through cable. The
LAN
LED lights to indicate an active connection.
ENTER
ENTER
ENTER