GE MDS entraNET Series, Руководство для стартапов

Страница: 7 / 32

05-4565A01, Rev. A MDS entraNET Start-Up Guide
5
The entraNET transceivers are capable of dealing with many common
security issues.
Table 1 profiles security risks and how the transceivers
provide a solution for minimizing vulnerability.
INSTALLATION PLANNING
It is highly recommended that the Access Point unit be installed first.
With this plan, you can quickly check the operation of each associated
Remote as it is placed on the air.
Should further information be needed, see “TECHNICAL ASSIS-
TANCE” on Page 28 of this guide for information on contacting the
MDS Technical Services Group. You will also find support informa-
tion at the GE MDS Web site:
www.GEmds.com .
INSTALLATION STEPS
There are three main requirements for installing the transceiver. They
are: adequate and stable DC power, a good antenna system, and the
correct interface between the transceiver and the data device.
Step 1—Mount the Radios
Figure 1 shows the dimensions of the AP transceiver with mounting
brackets attached. Figure 2 shows the same view for a Remote trans-
ceiver. When mounting entraNET transceivers, choose a location that
provides easy access to the connectors on the end of the radio and an
unobstructed view of the LED status indicators.
Table 1. entraNET Cyber Security Highlights
Security Level Specification
• MDS Cyber Security
Suite, Level 3:
• RC4-128 encryption
• Automatic rotating key algorithm
• Approved AP/Remotes list (local authentication)
• Failed login lockdown
• 900 MHz operation and proprietary data framing