GE LOGIQ P3 PRO, Руководство по обслуживанию

Страница: 42 / 348

GE
D
IRECTION
5308917-100, R
EVISION
8 LOGIQ P3 S
ERVICE
M
ANUAL
1-10 Section 1-3 - Safety Considerations
Section 1-3
Safety Considerations
1-3-1 Introduction
The following safety precautions must be observed during all phases of operation, service and repair of
this equipment. Failure to comply with these precautions or with specific warnings elsewhere in this
manual, violates safety standards of design, manufacture and intended use of the equipment.
1-3-2 Human Safety
Operating personnel must not remove the system covers.
Servicing should be performed by authorized personnel only.
Only personnel who have participated in a LOGIQ P3 Training are authorized to service the equipment.
1-3-3 Mechanical Safety
NOTE: Special care should be taken when transporting the unit in a vehicle:
• Before transporting, place the system in its special storage case.
• Ensure that the system is firmly secured while inside the vehicle.
• Secure system with straps or as directed otherwise to prevent motion during transport.
• Prevent vibration damage by driving cautiously. Avoid unpaved roads, excessive speeds, and
erratic stops or starts.
• Push the system with needed force to move over a threshold.
WARNING WARNING Ultrasound probes are highly sensitive medical instruments that can easily be damaged
by improper handling. Use care when handling and protect from damage when not in
use. Do not use a damaged or defective probe. Failure to follow these precautions can
result in serious injury and equipment damage.
WARNING WARNING
Never use a probe that has fallen to the floor. Even if it looks ok, it may be damaged.
CAUTION
The LOGIQ P3 weights 80kg or more, depending on installed peripherals, when ready for use.
To avoid possible injury and equipment damage:
ALWAYS:
•
Use the handle to move the system.
• Do not let the system strike walls or door frame.
• Limit movement to a slow careful walk.