GE
Direction 5370626-100, Revision 18 LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
10-20
Section 10-7 - When There's Too Much Leakage Current...
______________________________________________________________________________
______________________________________________________________________________
ELECTRICAL SAFETY
Final Check. All system covers are in place. System scans with all probes as expected.
Accepted by: ______________________________________________________________________
Electrical Test Performed
Max Value
Allowed
Value
Measured
OK?
Comments
Outlet (correct ground &wiring config.)
Type BF Applied Part Leakage Current
Limits- Probe
enclosure Source Leakage Current -
Chassis Leakage Current Limits
Peripheral 1 Leakage Current
Peripheral 2 Leakage Current
PROBES
Probe Number
(from previous page)
Max Value
Allowed
Max Value
Measured
OK?
Comments
Probe 1:
Probe 2:
Probe 3:
