LOGIQ 7/LOGIQ 7 Pro Quick Guide
Direction 5307393-100 Rev. 1
42
“Mains ON” indicates the power on position of the mains power breaker.
Refer to
Chapter 3
in the
Basic User Manual
for
location information.
“ON” indicates the power on position of the power switch.
CAUTION:
This Power Switch
DOES NOT ISOLATE
Mains Supply.
“Standby” indicates the power standby position of the power switch.
CAUTION:
This Power Switch
DOES NOT ISOLATE
Mains Supply.
See “Power Switch Location” on page 1.
“Protective Earth” indicates the protective earth (grounding) terminal.
Rear panel
““Equipotentiality” indicates the terminal to be used for connecting equipotential conductors when
interconnecting (grounding) with other equipment.
Connection of additional protective earth conductors or potential equalization conductors is not necessary in
most cases and is only recommended for situations involving multiple equipment in a high-risk patient
environment to provide assurance that all equipment is at the same potential and operates within acceptable
leakage current limits. An example of a high-risk patient would be a special procedure where the patient has
an accessible conductive path to the heart such as exposed cardiac pacing leads.
Rear panel
Alternating Current symbol is in accordance with IEC 60878-01-14.
Rear Panel, Circuit breaker label of console and
front panel (if applicable).
Rating plate
This symbol indicates that waste electrical and electronic equipment must not be disposed of as unsorted
municipal waste and must be collected separately. Please contact an authorized representative of the
manufacturer for information concerning the decommissioning of your equipment.
Rear
No hazardous substance, above the maximum concentration value, is present. Maximum concentration values
for electronic information products, as set by the People’s Republic of China Electronic Industry Standard SJ/
T11364-2006, include the hazardous substances of lead, mercury, hexavalent chromium, cadmium,
polybrominated biphenyl (PBB), and polybrominated diphenyl ether (PBDE).
Indicates the presence of hazardous substance(s) above the maximum concentration value. Maximum
concentration values for electronic information products, as set by the People’s Republic of China Electronic
Industry Standard SJ/T11364-2006, include the hazardous substances of lead, mercury, hexavalent chromium,
cadmium, polybrominated biphenyl (PBB), and polybrominated diphenyl ether (PBDE). “10” indicates the
number of years during which the hazardous substance(s) will not leak or mutate so that the use of this product
will not result in any severe environmental pollution, bodily injury, or damage to any assets.
Probe
Table 1-2: Label Icons
Label/Icon
Purpose/Meaning
Location
