GE JSP62GN, Инструкция по использованию и уходу

Страница: 35 / 48

Oven Light Bulb Replacing the Lamp and Starter
The light bulb is located on the
Do not touch the lamp when it is hot or with wet hands. Never wipe light
left side of the back wall of the
with a wet Before removing the lamp, disconnect electrical power to
oven. Before replacing the bulb,
range at the main or circuit breaker or the from the
disconnect to the electrical outlet.
range at the main fuse-or circuit
breaker panel or unplug the range
from the electrical outlet. Let the
bulb cool completely before
removing it. For your safety,
do not touch a hot bulb with a
damp cloth. If you do, the bulb
will break.
Socket
‘\
Bulb
‘f’
To
remove:
●
Unscrew the cover and remove
the bulb.
To
replace:
in a new 40-watt
appliance
bulb. (Note: A 40-watt appliance
bulb is smaller than a standard
40-watt household bulb.)
●
Install and tighten the cover.
●
Reconnect electrical power to
the range.
Fig. 1
Side
Fig. 2
grin:
Bulb
Starter //
To
replace the fluorescent lamp:
1. Push the lamp glass up until the
bottom of the glass is above the tabs
Fig. 1.
To replace starter:
1. Remove lamp glass as shown in
on each side.
2. Grasp starter, turn it counter-
2. Move the bottom of the lamp
about 1/4 turn and lift
glass forward to clear the tabs and
out. Replace with one of the same
remove the glass.
wattage.
3. Remove the lamp by sliding your
3. Replace lamp glass as shown in
fingers under the lamp at each end
Fig. 1.
and rotating the bottom of the lamp
1/4 turn toward you.
(continued
4. Replace the lamp with one of the
same length and wattage.
5. If necessary, reposition the side
trims and springs as shown.
Reposition the lamp glass into the
35