
Automatic Oven Timer
The oven timer will automatically
start and stop your oven cooking or
self-cleaning operation for you.
For automatic oven cooking:
1. Push COOK TIME button.
2. Turn SET knob to set length of
baking time.
3. Push BAKE button.
4. Turn SET knob to set desired
temperature.
When cook time is reached, the
End-of-Cycle Tone will sound and
the oven will turn off.
During automatic cooking:
●
You can push the STOP TIME
button to find out when the End-of-
Cycle Tone will sound and the oven
will turn off.
●
You can push the CLOCK button
to display time of day without
canceling the oven operation.
To Delay Starting an
Automatic Oven Operation
If a delayed cooking operation
is desired:
1. Push COOK TIME button.
2. Set length of baking time with
SET knob.
3. Push STOP TIME button.
4. Turn SET knob to time of day
when baking should be completed.
The electronic control will not
permit you to set a stop time that is
less than the length of cooking time
plus the current time of day.
5. Push BAKE button.
6.
SET knob to desired
temperature.
When stop time is reached, the
End-of-Cycle Tone will sound and
the oven will turn off.
Caution: It is strongly
recommended that meats and
start cooking after no more
than one hour delay. Never let any
food sit in the oven for more than
2 hours before cooking starts.
Room temperature is ideal for the
growth of harmful bacteria. Be sure
oven light is off because heat from
the bulb will
bacteria
Note: You can push the
TIME button to find out when the
oven will turn off.
If a delayed self-cleaning oven
operation is desired, seepage 38.
How to Change
a Program
When a function has been
entered, you can recall what has
been programmed by pushing
the corresponding function
button. The messages in the
display show you which function
is currently being displayed.
While the function is displayed,
you can change it with the SET
knob. You can change any
programmed function at any
time.
Tones
End-of-Cycle Tone (3 long
one second on, one second off):
shows that a timed oven operation
has reached STOP TIME or that
the Minute/Second Timer has
counted down.
Attention Tone (series of short
beeps, l/4-second on, l/4-second
off, until proper response is given):
will sound if oven has only been
rammed. For example,
partially prog
if you have selected a cook time but
no temperature, you will hear the
Attention Tone until you select a
temperature or push CANCEL.
Notification Tone (single,
second beep): indicates oven has
stabilized at selected temperature.
Key Tone (single, l/10-second
beep): sounds when any button
is pushed.
Function Error Tone (series of
very rapid beeps, l/8-second on,
l/4-second off). The display will
show a Function Error Code, “F1
etc. Cancel the Function
Error Tone by pushing the
CANCEL button. If the Function
Error Tone starts again (after about
15 seconds), call for service,
mentioning the code that appeared.
the range
supply to stop the tone.
If the function error occurred
while you were programming the
Electronic Control, push the
CANCEL button and try again.
To Cancel the Tone... If you don’t
want an audible tone when you push
a button, you can eliminate the Key
Tone by pushing and holding the
CANCEL button until you hear a
short beep (in approximately two
seconds). To activate the tone again,
push and hold the CANCEL button
once more until you hear a short
beep. Canceling or activating the
tone should only be done when there
is no oven operation programmed.
Pushing the CANCEL button will
clear all functions except the Clock
and Minute/Second Timer.
25
Содержание JSP62GN
