GE JSP62GN, Инструкция по использованию и уходу

Страница: 33 / 48

-
Porcelain Enameled
Grease Wells
Porcelain enamel can crack or chip
with misuse. It can stain if
of foods with a high acid
content (such as tomatoes or lemon
juice) are not cleaned up quickly.
When cleaning porcelain grease
wells, be careful not to get the
electrical receptacles wet. Do not
try to fill the wells with water.
Brushed Chrome Finish
Wash with soap and water. For
heavy soils, first cover with a damp
cloth and let soak 30 minutes. A
chrome cleaner may be used.
To remove fingerprints, apply a
little baby oil or cooking oil with a
cloth or paper towel. Rub in the
same direction as the brush marks
on the chrome. The entire chrome
area of the top must be cleaned to
keep the finish consistent in color.
Cleaning methods described above
may prove ineffective. Stubborn
baked-on food residue or stains on
chrome maintop surfaces can be
removed by using pad type oven
cleaners. For your safety, use
extreme caution. Oven cleaners
are caustic and can damage or
discolor most other surfaces.
Do not use spray type oven
cleaners. Overspray will damage
nearby surfaces. Use newspaper
and masking tape to cover surfaces
such as back wall, control panel,
range sides, countertop, etc.
Remove
modules, grill heating
elements and grids.
Grill Module
Clean the grill module after every
use. Do not put the element into
water. It cleans itself when heated
during normal use. To remove any
charred soil, clean with a dry, stiff
brush when the element is cool.
Never use steel wool or metal
scouring pads because they may
damage the outer casing of the
element.
Wash the non-stick grill grids at the
sink in soap and water. Use a non-
metal scouring pad if necessary.
Do not use abrasive cleaning
products.
From time to time, you should
recondition the grids with cooking
oil as explained on page 17.
Wash chrome plated reflector plates
at the sink in soap and water, or put
in the dishwasher. Soak stubborn
stains then rub gently with a
scouring pad.
Do
not put the reflector plates or
grill grids in the oven during a
self-cleaning cycle. Doing so will
cause discoloration and damage
the finish.
Griddle
After cooking a greasy food, wipe
the non-stick griddle while it is still
warm with a dry paper towel. Be
careful not to burn your fingers.
When cool, wash the griddle at the
sink in soap and water. Use a non-
metal scouring pad if necessary.
Do not use abrasive cleaning
products. Do not wash in the
dishwasher.
From time to time. recondition the
Module Cover
Do not place the cover on a hot
module or leave it over a grill while
preheating. To clean the module
cover, wash it at the sink with soap
and water and dry. For stubborn
soil, let it soak 5 or 10 minutes or
use a nylon brush or pad. Do not
use a metal scouring pad or other
abrasives. Do not put the cover in
your dishwasher-the wooden
handles may be damaged.
Chrome Module Surfaces
Remove module from maintop and
place on several layers of
newspaper. Remove open coil
elements and drip pans.
Apply the pad type oven cleaner
evenly to the entire chrome portion
of the module top. The entire
chrome area of the top must be
cleaned to keep the finish
consistent in color. Use extreme
caution to prevent the oven cleaner
from coming in contact with any
other surfaces. Let the cleaner
remain on the top for 20 to 30
minutes. Rinse the top well to
remove every trace of oven cleaner.
Dry the top and apply Armor All
to protect the finish.
(continued
griddle with oil as described
on page 20.
It is a good idea to store the griddle
on one edge. If you lay it flat, pans
or other cookware maybe put on top
and scratch the non-stick coating.
33