GE JP383, Инструкция по использованию, уходу и установке

Страница: 12 / 44

DISK
How to Insert the Module
1.
Be sure the controls are turned
to To install the module,
position the plug to the outside
wall of the cooktop.
2. Slide the module toward the
in the side of the cooktop
until the plug is pushed the
way in.
3. the edge of the
into the cooktop until
it is flush with the cooking
How to Remove the Module
.
1.
Be sure the controls are turned to and the solid
3. To unplug, hold the module by the front and back
disk surface units are cool before attempting to
edges and slide toward the center of the cooktop.
remove the module.
Lift out when unplugged.
2. Lift up the tab at the edge of the
4. If you are storing do not stack them or
the base clears the opening at the side of the cooktop. store other materials on top of them. This could
damage the surface of the
Before Using Your Solid Disk Module for the First Time
The top working surface of solid disk surface units UNIT’S
have a protective coating which must be hardened
BE HARDENED TO
before using the surface units for the first time. HELP PROTECT THE
To harden this coating, the surface units should be THROUGHOUT ITS
briefly heated without a pan for about 5 minutes at the
HI setting. Otherwise the
stick to the pan.
There be some smoke and odor; this is
Heating of the surface units change the
steel unit trim rings to a gold color.
12