background image

– 36 –

  Fault Codes

Fault Code 

Description 

Possible Fixes / Service Checks

SEt

Model number not programmed into UI

Program model number via service tools.

F10~F11

Problem with LED’s on user interface

Check Power. Replace UI Board.

F61

Cannot communicate with induction module 
that powers left coils

Check wires connecting UI to induction 

Tray. Replace UI. Replace induction Tray.

F62

Cannot communicate with Induction Module 
that powers right coils

Check wires connecting UI to induction 

Tray. Replace UI. Replace induction Tray.

F63

Cannot communicate with induction module 
that powers right coils

Check wires connecting UI to induction 

Tray. Replace UI. Replace induction Tray.

F70~F76

User Interface key fault 

Clean UI. Cycle power. Replace UI Board.

FA0

Fan Harness(is) not connected

Check wires connecting UI to Induction 

Tray. Check Fan, UI and induction Tray.  

Replace fan.

FA1

Fan1 is not running at the correct Low speed  Check wires connecting UI to Induction 

Tray. Check Fan, UI and induction Tray. 

Replace fan.

FA2 

Fan1 is not running at the correct High 
speed

Check wires connecting UI to Induction 

Tray. Check Fan, UI and induction Tray. 

Replace fan.

FA3

Fan2 is not running at the correct Low speed Check wires connecting UI to Induction 

Tray. Check Fan, UI and induction Tray. 

Replace fan.

FA4

Fan2 is not running at the correct High 
speed

Check wires connecting UI to Induction 

Tray. Check Fan, UI and induction Tray. 

Replace fan.

FA5, FA9, FAA Bad coil thermistor reading

Check coil thermistor and induction Tray. 
Replace coil.

FA6

Low or high line voltage 

Check line voltage. Replace Induction Tray.

FA7

Missing line frequency

Check line voltage/frequency. Replace 
Induction Tray.

FA8, FAB

Bad induction driver (IGBT)

Replace Induction Tray.

FAC

Induction microprocessor fault

Replace Induction Tray.

Содержание JP3030*J series















































Отзывы: