background image

– 26 –

Power Sharing

A 36 inch cooktop has three cooking zones, and a 30 inch cooktop has two cooking zones. If two elements 

in the same zone are in use, and at least one element is at the maximum power level (Hi), the Hi setting will 
operate at a reduced power level. Note that the display will not change. This is how power is shared between 
two elements in the same cooking zone.

Cooktop Lockout

Lock: Touch Control Lock pad for 3 seconds.

7R7XUQ2ȹ

: Touch Control Lock pad again for 3 seconds.

See Custom Settings section to activate Auto Lock feature.

Single Kitchen Timer

To Turn On

Touch the Timer Select pad. Touch the up "^" or down "v" arrows to choose the desired number of minutes.

The timer automatically starts 3 seconds after pad is touched. The “ON” LED will appear automatically when 

the timer is set.

7R7XUQ2ȹ

Hold the Timer Select pad for 3 seconds to cancel the timer. The alarm will sound continuously when time is 

XSXQWLOWKHXVHUWXUQVWKHWLPHURȺ

NOTE: Use the kitchen timer to measure cooking time or as a reminder. The kitchen timer does not control 

WKHFRRNLQJHOHPHQWV7KHWLPHUWXUQVRȺLIWKHUHLVQRDFWLYLW\IRUVHFRQGV

30” Wide cooktop.

36” Wide cooktop.

e

n

o

Z

 t

h

g

i

R

e

n

o

Z

 t

f

e

L

Center Zone

Left Zone

Right Zone

Cooktop Lockout: locks operation of the controls

Control Lock 

Indicator/Symbol

Содержание JP3030*J series















































Отзывы: