GE JP3030*J series, Техническое обслуживание руководство

Страница: 28 / 46

– 28 –
Custom Settings
Allows consumer to adjust sound, light levels and lock functions.
1. Press and hold the $OO2ȹ pad for 3 seconds, then
immediately press and hold the Timer Select pad for 3
seconds to enter Custom Settings. Those two pads must
be pressed within 30 seconds. Any other pad will cancel the
mode.
2. “C - -” appears on the display. To navigate through the
Custom Settings, use the up "^" or down "v" pads. If up "^"
is selected, the display cycle starts at “C01”. If down "v" is
selected, the display cycle starts at “C62”.
3. To activate a new Custom Setting, the user will touch and
hold the Timer Select pad for 3 seconds. Only one of the
Custom Setting choices can be activated for each Custom
6HWWLQJ7KHUHG´2Qµ/('ZLOOWXUQRQDQGDVRXQGZLOOJRRȺ
once a new custom setting is activated.
4. The cooktop will exit Custom Settings if it is inactive for 3
minutes.
5. To exit Custom Settings and save any changes, touch and
KROGWKH$OO2ȺSDGIRUVHFRQGV
Custom Settings Custom Setting Choices
C0 (Factory Settings) C01 - Factory Reset (Clears customized settings and restores defaults).
C02 - Custom settings activated (Not visible unless any other custom setting
is selected. Automatically on when any other custom setting is selected. Not
selectable by user.
C1 (Control Lock) C11 - Standard Lock (i.e.: Only on when lock button pressed for 3 seconds). If using
a timer, Control Lock is unavailable.
C12 - Auto Lock (i.e.: Engages after cooktop has been in standby mode for 10
PLQXWHV7KHFRRNWRSVKRXOGEHFRPSOHWHO\RȺWRJRLQWR$XWR/RFN
C2 (LED light level) C21 - Full illumination.
C22 - Medium illumination.
C23 - Lowest illumination.
C3 (Button Loudness) C31 - All sounds activated at 100% (For alarm sounds, 100% = Whatever level is
set in c4).
C32 - Button sound level reduced by 50%. Alarm sounds at 100%.
C33 - Button sounds deactivated. Alarm sounds activated at 100%.
C4 (Timer Alarm
Loudness) C41 - High
C42 - Low
C5 (Timer Alarm
Duration) &,QGH¿QLWHLH$ODUPFRQWLQXHVXQWLOFDQFHOOHGE\WKHXVHU
C52 - Alarm sounds for 60 seconds.
C53 - Alarm sounds for 30 seconds.
C54 - Alarm sounds for 15 seconds.
C6 (Timer Mode) C61 - Single Kitchen Time (Independent of elements).
C62 - Multi-Timer (Tied to each element).
* Options in grey are default settings
Custom Settings Chart