GE JBP22, Инструкция по использованию, уходу и установке

Страница: 26 / 40

CARE AND CLEANING
(continued)
Surface Units and Drip Pans
To the surface units, turn the control to the
highest setting The burn off
any soil.
CAUTION
●
●
●
●
●
sure all the controls are turned to OFF and
the units are cool before attempting to
remove them.
Do not immerse the
surface units in liquids
kind.
Do not clean the surface units in dishwasher.
Do not bend the surface unit plug terminals.
Do not attempt to clean, adjust
0
1
- in any way repair
the receptacle.
To remove a surface unit:
To remove the drip pans for cleaning, the surface units
must be removed first.
Surface Unit
Lift the surface unit about inch above the drip pan
To replace a surface unit:
. Replace the drip pan into the recess in the
Make sure opening in the pan ines up
with the receptacle.
Insert the terminals of the surface unit through the
opening in the drip pan and into the receptacle.
●
Guide the surface unit into place so it rests evenly.
Drip Pans
Remove the surface units. Then lift out the drip pans.
For best results, clean the drip pans by hand.
Place them in a covered container (or a plastic bag)
with
cup ammonia to loosen the soil. Then scrub
with a soap filled scouring pad necessary. Rinse
with clean water and polish with a clean soft cloth.
The drip pans may also be cleaned in the dishwasher.
Clean the area under the drip pans often.
Built-up soil, especially grease, may catch on
Do not cover the drip pans with foil. Using foil
so close to the receptacle could cause shock, fire or
damage to the range.
and pull it out.
Do not lift the surface unit more than 1 inch.
If you do, it may not lie flat on the drip pan when
you plug it back in.
Repeated lifting of the surface unit more
than 1 inch above the drip pan can permanently
damage the receptacle.
26