GE H5018SC Скачать руководство пользователя страница 233

Страница: 233 / 278

Troubleshooting and System Messages

Invenia ABUS 2.0 – System Setup and Basic Service Manual

7-39

4700-0043-00 Rev. 4

Please enter a User name.

Informational message. Please try the operation
again.

Please retrieve the study before you load it.

Informational message. Please try the operation
again.

Unable to restore study. Please load it from the
study pane.

Informational message. Please try the operation
again.

Please restart DICOM receive application to make
the changes effective.

Informational message. Please try the operation
again.

Please select a location to export the study(s) to.

Informational message. Please try the operation
again.

Printer error.

Informational message. Please try the operation
again.

Please select another study.

Informational message. Please try the operation
again.

Please select either Export To Disk or Export to
DICOM Servers for exporting.

Informational message. Please try the operation
again.

Printer error.

Check the printer and try the operation again.

Report file [file name] already exists.

Change export filename.

Retrieve completed

Informational message.

Retrieving study <id>.

Informational message.

Study doesn’t exist.

Informational message. Please try the operation
again.

The Invenia ABUS 2.0 application has encountered
a problem.

Please restart the application.

The Invenia ABUS 2.0 disk space is below
[configured free space]%. Reviewed studies will
automatically be deleted to free space.

Informational message. Please manage disk space.

The Study doesn’t exist.

Informational message. Please try the operation
again.

The study <id> of the patient <id> already exists. Do
you want to overwrite?

Confirm selection.

The user name already exists. Please choose a
different user name.

Informational message. Please try the operation
again.

The view type of the image stored in the Invenia
ABUS 2.0 Storage can’t be changed.

Informational message.

Unauthorized to access the printer.

Informational message.

Table 7-6: Messages (Continued)

System Message

Cause/Action to Take

Содержание H5018SC























































































































































































































































































Результаты поиска

Содержание H5018SC

Отзывы:

Похожие инструкции для H5018SC

Бренды по названию

Популярные бренды

GE H5018SC, Техническая публикация

Результаты поиска

Содержание H5018SC

Отзывы:

Похожие инструкции для H5018SC

Бренды по названию

Популярные бренды