GE H48671KK, Руководство по обслуживанию

Страница: 109 / 432

GE H
EALTHCARE
DRAFT V
OLUSON
E8 / V
OLUSON
E6
D
IRECTION
KTD102576, R
EVISION
7 DRAFT (A
UGUST
23, 2012) S
ERVICE
M
ANUAL
Chapter 3 - Setup Instructions 3-43
3-7-4-2 P95D Printer - Settings
1.) Printer Settings directly on the B&W Printer:
a.) Press the
BRT
button on the printer and adjust Brightness to "0" by using the turning knob.
b.) Press the
CONT
button on the printer and adjust Contrast to "0" by using the turning knob.
c.) Press the
SHARP
button on the printer and adjust Sharpness to "3" by using the turning knob.
d.) Press the
FUNC
button on the printer and adjust Gamma to "
r
5" by using the turning knob.
e.) Press the
BRT
button twice to save and exit.
2.) Assign the Printer to the remote keys
P1
,
P2
,
P3
and/or
P4
;
see: Section 3-7-5 "Remote Control Selection" on page 3-48 .
3.) Activate USB Serial number:
a.) Turn off Printer and wait 5 seconds.
b.) Press and hold the buttons
COPY
+
CONT
and power on the printer.
When the Display changes to “S1” the buttons can be released.
c.) Press the
FUNC
button -> the display changes to “U0”.
d.) Adjust the value to “U2” via turning knob.
e.) Press the
FUNC
button again -> the display changes to another value (normally “F0”).
f.) Power off the Printer.
Figure 3-42 Printer Settings - B&W Printer
Brightness: 0
Contrast: 0
Sharpness: 3
Gamma: 5