GE Entellisys 4.0 Скачать руководство пользователя

Страница: 10 / 43

Section 5. EntelliGuard Breaker

normally open and one normally closed contact.

normally open and one normally closed contact.
The position switch is used to indicate the drawout

The position switch is used to indicate the drawout
position of the

position of the breaker

breaker, and

, and the switch contacts

the switch contacts

change state when the breaker is moved between

change state when the breaker is moved between
the CONNECT and the TEST positions. The two

the CONNECT and the TEST positions. The two
contacts on the position switch are wired to the

contacts on the position switch are wired to the
Messenger in the breaker cubicle and provide

Messenger in the breaker cubicle and provide
break

breaker dra

er drawout

wout position indication on the

position indication on the Breaker

Breaker

Status screen at the HMI. They can also be used in

Status screen at the HMI. They can also be used in
any Flex Logic control scheme.

any Flex Logic control scheme.

Spring Charge Indicator Switch

The spring charge indicator switch is provided on

The spring charge indicator switch is provided on
all electrically operated EntelliGuard circuit breakers

all electrically operated EntelliGuard circuit breakers
and is wired to the Messenger. This contact provides

and is wired to the Messenger. This contact provides
status of the circuit breaker closing springs on the

status of the circuit breaker closing springs on the
Breaker Status screen at the HMI and can also be

Breaker Status screen at the HMI and can also be
used in Flex Logic control schemes.

used in Flex Logic control schemes.

Remote Close Accessory with One-Shot

Remote Close Accessory with One-Shot
Electronic Close Circuit

Electronic Close Circuit

The remote close accessory is an electrically

The remote close accessory is an electrically
operated solenoid which, when energized through

operated solenoid which, when energized through
the HMI or a Flex Logic control scheme, closes the

the HMI or a Flex Logic control scheme, closes the
EntelliGuard circuit breaker

EntelliGuard circuit breaker. The

. The remote close

remote close

accessory

accessory consists o

consists of the

f the “one-shot” electr

“one-shot” electronic

onic

close circuit, with built-in anti-pump feature, and

close circuit, with built-in anti-pump feature, and
the closing solenoid. The remote close accessory

the closing solenoid. The remote close accessory
is continuously rated and operates as follows.

is continuously rated and operates as follows.

Applying control voltage to the close circuit through

Applying control voltage to the close circuit through
the Messenger produces a 250ms pulse to the

the Messenger produces a 250ms pulse to the
closing coil which, in turn, releases the energy stored

closing coil which, in turn, releases the energy stored
in the closing springs. The anti-pump feature prevents

in the closing springs. The anti-pump feature prevents
the breaker from repeatedly closing if the close

the breaker from repeatedly closing if the close
signal is maintained. The Messenger provides a

signal is maintained. The Messenger provides a
momen

momentary

tary close sign

close signal (1⁄2 second durati

al (1⁄2 second duration)

on)

whenever the HMI or Flex Logic issues a close

whenever the HMI or Flex Logic issues a close
command. Reset time for the anti-pump circuit is

command. Reset time for the anti-pump circuit is
approximately 2.5 seconds.

approximately 2.5 seconds.

Secondary Disconnect

All EntelliGuard breakers are furnished in drawout

All EntelliGuard breakers are furnished in drawout
constructio

construction. The interface between the

n. The interface between the breaker and

breaker and

the Entellisys system occurs through a rugged,

the Entellisys system occurs through a rugged,
36-po

36-point seconda

int secondary

ry disco

disconnect mounte

nnect mounted on

d on the

the

top of the circuit breaker. The secondary disconnect

top of the circuit breaker. The secondary disconnect
is engaged when the breaker is in the CONNECT and

is engaged when the breaker is in the CONNECT and
TEST positions and is disengaged when the breaker

TEST positions and is disengaged when the breaker
is in the DISCONNECT position. A feedback mecha-

is in the DISCONNECT position. A feedback mecha-
nism is provided on the secondary disconnect to

nism is provided on the secondary disconnect to
confirm to Entellisys that the secondary disconnect

confirm to Entellisys that the secondary disconnect

is properly engaged. Status of the secondary

is properly engaged. Status of the secondary
disconnect (Connected or Disconnected) is shown

disconnect (Connected or Disconnected) is shown
on the Breaker Status screen at the HMI.

on the Breaker Status screen at the HMI.

Shunt Trip

The shunt trip allows remote electrical opening of

The shunt trip allows remote electrical opening of
the EntelliGuard circuit breaker through the HMI

the EntelliGuard circuit breaker through the HMI
and Flex Logic. The shunt trip is supplied on all

and Flex Logic. The shunt trip is supplied on all
electrically operated breakers and is not available

electrically operated breakers and is not available
on manually operated breakers. The shunt trip coil

on manually operated breakers. The shunt trip coil
is rated for intermittent duty and is supplied with

is rated for intermittent duty and is supplied with
an auxiliary switch contact that automatically

an auxiliary switch contact that automatically
removes control power from the coil when the

removes control power from the coil when the
breaker opens.

breaker opens.

Spring Charging Motor

The spring charging motor is supplied on all elec-

The spring charging motor is supplied on all elec-
trically operated EntelliGuard circuit breakers. The

trically operated EntelliGuard circuit breakers. The
breaker clo

breaker closing springs

sing springs are

are charged automatical

charged automatically

when control voltage is

when control voltage is applied to the

applied to the breaker

breaker. This

. This

typically occurs when the breaker is racked in to

typically occurs when the breaker is racked in to
the cubicle

the cubicle and the

and the secondary

secondary disconnect engages.

disconnect engages.

When the breaker closing springs are fully charged,

When the breaker closing springs are fully charged,
a

a cutoff switch de-ener

cutoff switch de-energizes the charging

gizes the charging motor

motor..

The closing springs will recharge automatically

The closing springs will recharge automatically
after a breaker closing operation. If control power

after a breaker closing operation. If control power
is lost during the spring charging cycle, spring

is lost during the spring charging cycle, spring
charging can be completed using the integral

charging can be completed using the integral
manual pump handle.

manual pump handle.

Ratings

The EntelliGuard

The EntelliGuard breaker is

breaker is available in

available in 800, 1600,

800, 1600,

2000, 3200, 4000, and 5000 amp frame sizes with

2000, 3200, 4000, and 5000 amp frame sizes with
short circuit interrupting ratings from 30kA to 200kA.

short circuit interrupting ratings from 30kA to 200kA.
The model number of the breaker indicates its

The model number of the breaker indicates its
interrupting capacity (IC). EGS indicates “Standard

interrupting capacity (IC). EGS indicates “Standard
IC,”

IC,” EGH indi

EGH indicates “Hi

cates “High IC,

gh IC,”” EGX ind

EGX indicates “E

icates “Extended

xtended

IC,”

IC,” and EGF

and EGF indicates “Fused.

indicates “Fused.””

High IC

High IC and Ex

and Extended

tended IC brea

IC breakers

kers are

are used w

used with

ith

larger kVA substation transformers as well as in

larger kVA substation transformers as well as in
paralleling applications. Fused circuit breakers have

paralleling applications. Fused circuit breakers have
a

a 200kA IC rati

200kA IC rating for use in large net

ng for use in large network syst

work systems.

ems.

Table 5.1 lists the interrupting capacities (IC) for

Table 5.1 lists the interrupting capacities (IC) for
EntelliGuard

EntelliGuard breakers at

breakers at system o

system operating voltages.

perating voltages.

Catalog Numbers

A unique catalog

unique catalog number identifies

number identifies all Entell

all EntelliGuard

iGuard

breakers. The catalog number contains information

breakers. The catalog number contains information
on the breaker frame rating (continuous current

on the breaker frame rating (continuous current
and short circuit), the fuse rating (if equipped with

and short circuit), the fuse rating (if equipped with

Содержание Entellisys 4.0












































Результаты поиска

Содержание Entellisys 4.0

Отзывы:

Похожие инструкции для Entellisys 4.0

Бренды по названию

Популярные бренды

GE Entellisys 4.0, Инструкция по применению

Результаты поиска

Содержание Entellisys 4.0

Отзывы:

Похожие инструкции для Entellisys 4.0

Бренды по названию

Популярные бренды