for JCSS2S0 model
The oven door is removable for cleaning.
Do not lift the door by the handle. Make sure
the oven is completely cool.
To remove the door
, open it to the special
Do not place hands between the hinge and
the oven door frame.
To replace the door
, make sure the hinges
are in the special stop position. Position the
slots in the bottom of the door squarely over
the hinges and slowly lower it over both
hinges.
To clean the inside of the door:
Do not allow excess water to run into
27
Safety Inst
ructions
Ca
re and Cleaning
Troubleshooting Tips
Consumer
Suppo
rt
Operating Inst
ructions
With the door at
the same angle
as the removal
position, seat
the indentation
of the hinge
arm into the
bottom edge of
the hinge slot. The notch in the hinge
arm must be fully seated into the
bottom of the slot.
Fully open the door. If the door will
not fully open, the indentation is not
seated correctly in the bottom edge
of the slot.
Push the hinge locks up against the
front frame of the oven cavity to the
locked position..
Close the oven door.
The door is very heavy. Be careful when
removing and lifting the door.
Do not lift the door by the handle.
To remove the door:
Fully open the door.
Pull the hinge locks down toward the
door frame, to the unlocked position.
screwdriver, may be required..
Firmly grasp both sides of the door at
the top.
Close door to the door removal position,
which is halfway between the broil stop
position and fully closed.
Lift door up and out until the hinge arm
is clear of the slot.
o replace the door:
Firmly grasp both sides of the door at
the top..
T
Lift the door straight up and o
the hinges.
Hinge
lock
Hinge
arm
Indentation
Hinge arm
Bottom
edge of
slot
Lift-Off Oven Door
(on some models)