GE eBike with Control Terminal PC, Руководство оператора

Страница: 46 / 172

Setup and Mains Connection
10 eBike with Control Terminal PC 2018112-001 Revision B
Figure 2-3 Installing the control terminal
Figure 2-4 Installing the control terminal
Installing the Control Terminal
y
Plug connector A to socket a on the control terminal.
Align the notch on connector A with the
corresponding groove in socket a.
y
Secure the connection by turning the coupling ring at
connector A clockwise.
y
Connect the blue pressure tubing B to the length of
tubing b at the control terminal. Be sure to slip the
length of tubing entirely over the nozzle. (The black
tube C is irrelevant.)
y
Position the control terminal on the steering column
and screw tight with the two screws.
a
A
b
B
C
Note
The control terminal can be installed with the
display facing the patient or the operator (Figure 2-
4). Install the control terminal with the display
toward the operator and the speed indication
toward the patient (see section 4.1 Speed Readout
for the Patient).