GE eBike with Control Terminal PC, Руководство оператора

Страница: 47 / 172

Setup and Mains Connection
2018112-001 Revision B eBike with Control Terminal PC 11
Figure 2-5 Connector panel
a
Power input, instrument fuses
b Digital interface RS232
c Analog I/O
d For Service
e Not used
f Digital interface RS232
g Digital interface RS232 (for Service only)
Mains Connection
y
Stand in front of the ergometer and grasp both handles
of the handlebar.
y
Tip the ergometer forward all the way and carefully
lay it on its handlebar.
Now you can access the connector panel on the underside
of the ergometer.
y
Connect the power cord to socket a (Figure 2-5).
y
Secure the connector with the supplied lock a.
y
Install the strain relief as shown in Figure 2-5. Please
note that different strain reliefs are supplied for
various cable sizes.
Connection to Electrocardiographs
The software supports communication with the following
electrocardiographs:
electrocardiographs (digital control):
*) eBike with integrated BP module only
electrocardiographs (analog control):
Upon delivery, the eBike is configured for
communication with digitally controlled
electrocardiographs.
For use with electrocardiographs with an analog control
system (MAC 5000 ST), the following settings are
required (see section 6 "Configuration"):
– at Default Mode: PC Operation
– at EKG-Typ: Analog / Digital
y
Install a strain relief to secure the cable connection.
Caution
Equipment Damage — Before connecting the
ergometer to the power line, make sure that the
voltage rating of your local power line matches the
value indicated on the device nameplate. The
nameplate is located on the back of the ergometer,
at the bottom.
f
g
e
d
c
b
a
6
2
8 7
1
4
5
3
2
1
4
5
3
PORT 2
PORT 3 ANALOG
PORT 1 NOT CONNECTED SERVICE
g
f
e
b
c
d
electro-
cardiograph connection
cable connector on
eBike
CardioSys 22336203 port 1, f
CardioSoft 22336203 port 1, f
CASE 22336203 port 1, f
CASE 8000 22336203 port 1, f
MicroLab 22336203 port 1, f
CardioSmart ST*) 22338002 port 3, b
MAC 1200 ST 22338002 port 3, b
electro-
cardiograph connection
cable connector on
eBike
MAC 5000 ST 2008110-001
2008114-001 ANALOG, c
port 3, b